Roland UA-4FX2, Owner'S Manual

Page: 1 / 18

1
Owner’s Manual UA-4FX2
Before using this unit, carefully read “USING THE UNIT SAFELY” (p. 16) and “IMPORTANT NOTES” (p. 17). After reading, keep the document(s) where it will
be available for immediate reference.
Copyright © 2017 ROLAND CORPORATION
Contents of the Package
5
UA-4FX2
5
Owner’s Manual (this document)
5
USB cable
Installing the Driver
* Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data.
Windows 10 Users
1.
Use the included USB cable to connect the UA-4FX2 to your computer.
The driver is installed automatically.
Windows 7 or Windows 8.1 Users
NOTE
Don’t connect the UA-4FX2 to your computer before installing the driver.
If you’ve already connected the UA-4FX2, temporarily disconnect it.
When the screen indicates “Ready to install the driver. ---,” connect the UA-4FX2.
1.
Start up Windows with all USB cables disconnected other than the cables of your keyboard and mouse.
2.
Download the driver from the following URL.
&
http://roland.cm/ua4fx2
3.
Before you begin installation, close all applications.
4.
Unpack the downloaded Zip file, and double-click “Setup.”
5.
If a user account control confirmation screen appears, click [Yes].
6.
In the dialog box that indicates “UA-4FX2 Driver will be installed on your computer. ---,” click [Next].
* If any other message appears, proceed as directed by the message.
7.
To begin installation, click [Next].
8.
If a Windows security dialog box appears, click [Install].
9.
Note the dialog box that indicates “Ready to install the driver. ---”
* If any other message appears, proceed as directed by the message.
10.
Use the included USB cable to connect the UA-4FX2 to your computer.
The driver is installed automatically.
11.
In the dialog box that indicates “Installation has been completed.”, click [Close].
12.
If the “System Settings Change” dialog box appears, click [Yes] and restart Windows.