Turning on Bluetooth Communication
This machine supports the operation application, which is an application for mobile terminals. When using the
operation application, set this machine's Bluetooth communication to "ENABLE". However, when you are operat-
ing this machine from its operation panel, you cannot perform operations from the operation application.
Procedure
1.
Press [MENU].
2.
Press [
▼
] several times to display the screen shown below.
MENU
SYSTEM INFO.
3.
Press [
▶
] once, and then press [
▼
] several times to display the screen shown below.
SYSTEM INFO.
BLUETOOTH
4.
Press [
▶
] twice to display the screen shown below.
BLUETOOTH
DISABLE DISABLE
5.
Press [
▲
] or [
▼
] to select "ENABLE".
BLUETOOTH
DISABLE ENABLE
6.
Press [ENTER] to confirm your entry.
7.
Press [
◀
] to display the screen shown below.
The current state is displayed on the screen.
BLUETOOTH
ENABLE
ENABLE
Bluetooth communication is on, and the printer is waiting for a connection to be estab-
lished. If you cannot operate this machine from the dedicated mobile operation applica-
tion (hereinafter referred to as the "operation application") that you are using, there is
a problem with the connection environment.
P. 187 "Printer Cannot Be Operated from the Operation Application"
ENABLE*
Bluetooth communication is on, and the printer is connected to the operation applica-
tion.
However, when this screen is displayed, you cannot perform operations from the opera-
tion application.
P. 102 "Performing Operations from the Dedicated Mobile Operation Applica-
DISABLE
Bluetooth communication is off.
ERROR
An error has occurred in Bluetooth communication. Purchase them from your author-
ized Roland DG Corporation dealer.
8.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "DISABLE"
• There are some precautions regarding Bluetooth communication. Refer to "Important Notes on Using the Operation
for details.
• For details on the operation application, visit the Roland DG Corporation website (http://www.rolanddg.com/).
Managing the Basic Settings of the Printer
3. Optimizing Operation Management
117
Summary of Contents for TrueVIS VF2-640
