Roland TrueVIS VF2-640 User Manual Download

Page: 103 / 208

What Is the Dedicated Mobile Operation Application?

The dedicated mobile operation application (hereinafter referred to as the "operation application") is an applica-

tion for mobile terminals. This application can be used to operate the machine by way of Bluetooth communica-

tion.

P. 104 "Using the Operation Application"

Required System Environment

Supported op-

erating systems

• iOS 10.0 or later
• Android 6 or later (The operation application may not work on some Android devices even if their operating system is

version 6 or later.)

Supported lan-

guages

Japanese, English, French, German, Italian, Peninsular Spanish, Latin American Spanish

Communication

method

Bluetooth 4.0 LE
The mobile terminal you are using must support the above communication method.

For the latest information, visit the Roland DG Corporation website (

http://www.rolanddg.com/

Performing Operations from the Dedicated Mo-

bile Operation Application

102

2. Optimizing Work Efficiency

Summary of Contents for TrueVIS VF2-640

















































































































































































































Search results

Summary of Contents for TrueVIS VF2-640

Reviews:

Related manuals for TrueVIS VF2-640

Brands by name

Popular brands

Roland TrueVIS VF2-640, User Manual

Search results

Summary of Contents for TrueVIS VF2-640

Reviews:

Related manuals for TrueVIS VF2-640

Brands by name

Popular brands