22
How to Use
Playing Back
Connect the TRI-CAPTURE to a computer using the USB cable. Audio data is transferred in both
directions between the TRI-CAPTURE and computer via the USB cable.
By connecting headphones or amplified speakers as shown in the illustration, you can monitor
playback from your DAW software or the sound from an instrument or audio device connected to
the TRI-CAPTURE.
Computer
Amplified speakers
Headphones
Audio output device of
software: TRI-CAPTURE
Rear panel
Set the [OUTPUT
MUTE] button
to ”ON” to
not output
sound from the
speakers.
Use the
[PHONES] knob
to adjust the
volume of the
headphones.
Front panel
*
To carry out playback at a sampling rate of 96 kHz, set the [SAMPLE RATE] switch on the bottom
panel to “96k,” and set the [MODE] switch on the bottom panel to “PLAY.”
Summary of Contents for TRI-Capture
Page 50: ...50 For EU Countries For China ...