manualshive.com logo in svg

Roland TRI-Capture, Owner'S Manual

Share
Download
Roland TRI-Capture Owner'S Manual Download Page 15

15

Driver Installation

5. 

When a confirmation screen regarding user account control appears, click [Yes] 

or [Continue].

6. 

When “The TRI-CAPTURE Driver will be installed on your computer.” appears, 

click [Next].

7. 

Click [Next] again.

Windows 8/Windows 7/Windows Vista

If a dialog box regarding Windows security appears, click [Install].

Windows XP

If the “Software Installation” dialog box appears, click [Continue] to proceed with the 

installation. 

If you cannot proceed, click [OK] to cancel the installation. Change the settings as 

described in “Driver Signing Options Setting (Windows XP)” (p. 36) and try installing again.

8. 

When “Ready to install the driver.” appears, 

connect the TRI-CAPTURE to the computer 

using the USB cable.

* 

Turn down the volume on any peripheral devices 

before connecting the USB cable.

* 

This unit is equipped with a protection circuit. A 

brief interval (a few seconds) after power up is 

required before the unit will operate normally.

* 

Before switching the power on/off, always be sure to 

turn the volume down. Even with the volume turned 

down, you might hear some sound when switching the power on/off. However, this is 

normal and does not indicate a malfunction.

* 

It may take several minutes for the driver to be installed.

Windows 8/Windows 7/Windows Vista

If other messages appear, follow the instructions on the screen. The driver will be installed 

automatically.

Windows XP

“Found new hardware” will appear in the lower-right corner of the screen.

Windows 8/Windows 7/Windows Vista

 users: continue to p. 16

Windows XP

 users: continue to p. 17

Windows

Summary of Contents for TRI-Capture





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands