Roland S-4000M, Owner'S Manual

Page: 19 / 28

19
Connecting Peripheral Devices
Connecting digital snake devices other than the S-0808 and resetting the system (p. 20) makes the REAC master device detect the
input and output channel numbers as shown below.
The maximum number of channels assigned varies according to the input and output configuration of the connected REAC master device.
If the initially connected device is replaced with a different device, the channel-number mapping may not be detected correctly. When a device
has been replaced, the system must be reset to match the newly connected device.(p. 20)
* In the figures shown below, 1 through 4 refer to the REAC port numbers.
fig.variation.eps
Connecting Other Digital Snake Devices
OUTPUT
INPUT
CH1 - 8
CH1 - 32
CH1 - 8
CH33 - 40
CH1 - 8
No Assign
S-4000S-3208
S-0808 S-0808
OUTPUT
INPUT
CH1 - 8
CH1 - 16
CH1 - 8
CH17 - 32
CH1 - 8
CH33 - 40 (*)
S-1608
OUTPUT
INPUT
CH1 - 8
CH1 - 32
CH1 - 8
CH33 - 40 (*)
S-4000S-3208
S-1608
S-1608 S-1608
OUTPUT
INPUT
CH1 - 8
CH1 - 32
CH1 - 8
CH33 - 40 (*)
S-4000S-3208 S-4000S-3208
OUTPUT
INPUT
CH1 - 8
CH1 - 16
CH1 - 16
S-1608 S-0816
OUTPUT
INPUT
CH1 - 8
CH1 - 8
CH1 - 8
CH9 - 16
CH1 - 16
CH17 - 24
S-0816 S-0808 S-0808
* No Assign to
INPUT 9-16
* No Assign to
INPUT 9-16
* No Assign to
INPUT 9-32
1 2 3
1 2 3
1 2 1 2
1 2
1 2 3
CH17 - 24
S-4000M_e.book 19 ページ ２０１４年１１月２６日 水曜日 午後４時４分