> CI
Control Input Mode Settings
Function: Control Input Mode setting
Syntax:
stxCI:a,b,c, .... ,q;
a: Card in slot
0 Card
in
slot
A
1 Card in slot B
b: Control Input Mode
0 Direct
Play
1 Program (Count Play)
2 Binary
Play
3 Binary
REC
c: Direct Playback Method
0 Normal
1 First
In
2 Last
In
3 Sequence
d: Binary Playback Trigger Settings Level
0 Off
1 On
e: Binary Playback Trigger Settings Edge
0 Off
1 On
f: The Method used for specifying the phrase (Binary Recording)
0 Binary
1
1 Binary
2
Caution
Control Input Mode data will not be written to card.
= DP
Direct Playback Settings
Function: Direct Playback setting
Syntax:
stxDP:a,b,c, .... ,q;
a: Card in slot
0 Card
in
slot
A
1 Card in slot B
b - q: Phrase number which you wish to assign to control input pin
b (CH1)
c (CH2)
| |
q (CH16)
Example)
stxDP:0,A1, ... ,A3,A4, ... ,A16;
The setting will be written to “Card A”, and the phrases will be assigned to the control
input pin as follows; A0001 to CH1,...,A0003 to CH3, A0004 to CH4,..., and A0016 to
CH16.
Note:
For unused direct channels, specify “
----
”.
If you specify “PLAY” instead of a phrase, you can playback directly the phrase shown in
the display by the control input pin.
AR-3000
R Ver.2.01 R
S-232C Reference - 30
