= AE
Starting Time-Stamped Recording
Function: Starting Time-stamped Recording
Syntax:
stxAE:a,b,c,d,e,f,g,h,i;
a: year (1998 – 2050)
b: month (1 – 12)
c: day (1 – 31)
d: hour (0 – 23)
e: minutes (0 – 59)
f: second (0 – 59)
g: RDAC-Grade
0 Announce
1 Long
2
2 Long
1
3 Standard
4 High
5 S-High
h: RDAC-Mode
0 Linear
1 Mode
1
2 Mode
2
3 Mode
3
4 H – Linear
5 WAV
(*)
i: Recording Type
0 Mono
1 Stereo
* This parameter was added from the AR-3000R system version 2.00.
Example)
stxAE:2001,3,1,8,59,0,0,1,0;
Add a time stamp for “2001” “March” “1” “8:59:00” and start recording with “Announce”
“Mode 1” “Mono.”
Note:
The time information given in the command can be stored in the recorded phrase as a time
stamp.
The AR-3000R starts recording immediately when it receives an AE command. However,
when you have made the trigger recording setting, the waits for audio input higher than
the trigger level (the volume level at which recording starts), then starts recording. (It is
not necessary to send an RE command. Levels in trigger recording settings may change
depending on the immediately preceding recording action and the card settings.
）
The phrase number is automatically assigned to a free number where nothing is recorded.
Use the ST command to stop recording.
Also, the AR-3000R automatically returns the total number of phrases recorded on the card
when it receives an AE command. (Refer to AE command 4. 4. 1)
Caution:
The recording source of the AE command is fixed to the LINE-IN.
Note:
From the AR-3000R system version 2.01, the time stamp information is set as modified
time of the file. You can check modified time of the file by PC.
4.2.2 Editing
Commands
= DM
Enable Execution of Editing Commands
Function: Enable execution of editing commands.
Syntax:
stxDM;
Note:
In order for editing commands to be executed, the DM command must be used to put the
unit into Delete mode. For the communication protocol, refer to 4.1 2) Editing commands.
Caution:
When Delete mode is exited, the AR-3000R will automatically output a CC
command. The AR-3000R automatically escapes from the Delete mode two
minutes after the DM command is issued. To run editing commands, send a DM
command again to enter the Delete mode.
AR-3000
R Ver.2.01 R
S-232C Reference - 17
