Roland RG-3 Owner'S Manual Download

Page: 17 / 124

Panel Descriptions

Front Panel

fig.00-010

[Power] switch

Turns the power on/off (p. 20).

[Volume] knob

Adjusts the overall volume level (p. 20).

[Brilliance] knob

Adjusts the tone brightness (p. 20).

Tone buttons

They are used to choose the kinds of tones (tone
groups) played by the keyboard (p. 53).

[Piano 1] button

[Piano 2] button

[Harpsichord] button

[Vibraphone] button

[E.Piano] button

Display

Tone and song names and the values of various
settings are displayed here (p. 23).

[Function] (Exit) button

This switches the RG-3 to the Function screen (p. 23).

You can make various different settings in the Function
screen, including settings for the master tuning and
temperaments.

[Song] (Select -) button

This displays the Song Select screen (p. 23). The song
genre is switched each time you press this button while
the Song Select screen is displayed (p. 25).

When the Function screen is displayed, this button is
used to select the item for which settings are to be
made (p. 89).

[

] () button

Press this button while the Song Select screen is
displayed to select the previous song (p. 26, p. 30, p.
31).

When the Function screen is displayed, this button is
used to select the item for which settings are to be
made (p. 89).

[

] (Value -) button

Press this button while the Song Select screen is
displayed to start and stop playback of the song (p. 26,
p. 30, p. 31).

Press this button while the Function screen is displayed
to change the value of a setting (p. 89).

10 [

] (Value +) button

Press this button while the Song Select screen is
displayed to select the next song (p. 26, p. 30, p. 31).

Press this button while the Function screen is displayed
to change the value of a setting (p. 89).

11 [Enter] button

Press this button while the Function screen is open to
make even more detailed settings.

12 Infrared Receiver

Point the remote control at this sensor when using the

remote control to operate the RG-3 (p. 33).

7 8 9 10 11

Summary of Contents for RG-3





























































































































Search results

Summary of Contents for RG-3

Reviews:

Related manuals for RG-3

Brands by name

Popular brands

Roland RG-3, Owner'S Manual

Search results

Summary of Contents for RG-3

Reviews:

Related manuals for RG-3

Brands by name

Popular brands