Roland RG-3 Owner'S Manual Download

Page: 53 / 124

Chapter 2. Using the RG-3 with an External Display or Television

■

When Using a VIMA CD-ROM (VIMA TUNES)

Place the VIMA CD-ROM (VIMA TUNES) in the CD drive.

Press the [Song] button one or more times to select “CD” as the
song genre.

If using the remote control, press the remote control’s [EXTERNAL] button
and select “CD” for the song genre.

Press the [

] (Value -) button or [

] (Value +) button to

select the song you want to play back.

Pressing the remote control’s [DISPLAY] button, make the
settings for the slide show to appear in the external display or
television.

Press the [

] (Value -) button to play back the song.

The slide show with images suitable for the song is shown on the connected
external display or television screen.

Summary of Contents for RG-3





























































































































Search results

Summary of Contents for RG-3

Reviews:

Related manuals for RG-3

Brands by name

Popular brands

Roland RG-3, Owner'S Manual

Search results

Summary of Contents for RG-3

Reviews:

Related manuals for RG-3

Brands by name

Popular brands