Roland MODELA Pro II ZCL-540, User Manual

Page: 19 / 80

Important Notes on Handling and Use
This machine is a precision device. To ensure the full performance of this machine, be sure to observe the
following important points. Failure to observe these may not only result in loss of performance, but may
also cause malfunction or breakdown.
Rotary Axis Unit
This machine is a precision device.

Handle carefully, and never subject the machine to impact or excessive force.

Use within the range of specifications.

Diligently keep clean of cutting waste.

Never attempt to move the table or spindle unit by hand with undue force.
Install in a suitable location.

Install in a location that meets the specified conditions for temperature, relative humidity, and the like.

Install in a quiet, stable location offering good operating conditions.

Never use the machine in an environment where silicone substances (oil, grease, spray, etc.) are present. Doing
so may cause poor switch contact.
This machine becomes hot.

Never cover the ventilation holes with cloth, tape, or anything else.
17