Roland JU-06A, Operation Manual

Page: 8 / 29

8
ENV
Here you can create time-varying change (envelope).
CONTROLLER EXPLANATION
[A] slider Attack time
[D] slider Decay Time
[S] slider Sustain time
[R] slider Release time
9
SEQUENCER
CONTROLLER EXPLANATION
[START] button Makes the sequencer play (lit) or stop (unlit).
[EDIT] button Lets you edit the step sequencer.
[NOTE/GATE] switch Switches the target of editing (note number or gate time).
[VALUE] knob Use this to edit values.
10
COMMON SECTION
Here you can switch the sound (patch/bank).
CONTROLLER EXPLANATION
Display Shows the bank number and patch number.
During patch editing, a decimal point “ . ” is shown at the right of
the patch number.
If the SEQUENCER [EDIT] button is lit, this shows the tempo or
the sequencer value that you’re editing.
BANK [1(5)]-[4(8)]
What is “Patch/Bank”?
buttons Here you can save or recall 64 sounds taken from the JUNO-60 (8 patches × 8
PATCH [1]-[8] buttons banks) and another 64 sounds taken from the JUNO-106.
To switch the bank/patch
1. Press the BANK [1 (5)]–[4 (8)] buttons to switch the bank. Each time you
press the same bank button, you alternate between banks 1–4 and 5–8.
To select banks 5–8, you can also hold down the bank (5–8) that you want to