Roland JU-06A, Operation Manual

Page: 21 / 29

SEQUENCER SETTINGS
1. Hold down the SEQUENCER [EDIT] button and select a parameter by pressing one of the numeric
buttons shown in the following table.
2. Use the [VALUE] knob to edit the value.
3. Press the SEQUENCER [EDIT] button once again to exit sequencer settings editing.
BUTTON PARAMETER VALUE
[1] Shu ffl e Adjusts the timing of the notes for even-numbered
steps.
-50 - 50
[2] Step Order Type Specifies how the step sequencer plays.
NOR Play forward from the first step
EOR Exchange even-numbered steps with
odd-numbered steps during playback
ODD Play odd-numbered steps
EVN Play even-numbered steps
O-E Play odd-numbered steps, and then
even-numbered steps
E-O Play even-numbered steps, and then
odd-numbered steps
RND Play steps randomly
[3] O ff Step Mode Specifies how steps that are turned o ff will play.
RST Play a rest
SKP Advance to the next step without playing
[5] Last Step Specifies the length of steps that are played
L1 - L16
[6] Scale Specifies the note length (scale) of each step.
2T (half note triplet
4 (quarter note)
4T (quarter note triplet)
8 (8th note)
8T (8th note triplet)
16 (16th note)
16T (16th note triplet)
32 (32nd note)
Shu ffl e, Step Order Type, and O ff Step Mode settings return to their default values when the power is
turned o ff .
Last Step and Scale settings are saved with pattern settings.