ENTERING A TIE
1. Press the SEQUENCER [EDIT] button to make it light.
2. Hold down the step button for which you want to enter a tie, and press the SEQUENCER [EDIT]
button.
You can enter a tie for the following step as well by pressing the SEQUENCER [EDIT] button again. If you
turn a step button o
ff
, that step’s tie is deleted.
SAVING
If you modified the settings, the modified settings are lost if you turn o
ff
the power or select another
patch, chord memory, or pattern.
If you want to keep the changes that you made, perform the Write operation.
* KEYBOARD and ARPEGGIO settings are not saved.
SAVING A PATCH
If you modify the patch settings, a decimal point appears in the display. 1-1.
1. Press the save-destination BANK [1 (5)]–[4 (8)] button.
Each time you press the same bank button, you alternate between banks 1–4 and 5–8.
To select banks 5–8, you can also hold down the bank (5–8) that you want to select and press a di
ff
erent
bank button.
2. Long-press the save-destination PATCH [1]–[8] button. When the data is saved, the indicator blinks.
KEYBOARD and ARPEGGIO settings are not saved in the patch.
SAVING A CHORD MEMORY
If you modify the chord memory settings, a decimal point appears in the display. c 1.
1. Press the [NOTE] button to make it go dark.
2. Hold down the [CHORD] button and long-press a step button [1]–[16].
When the data is saved, the indicator blinks.
Summary of Contents for JU-06A
