Roland JU-06A, Operation Manual

Page: 24 / 29

[12] Arpeggiator 1 Specifies how the arpeggio plays.
Style 1 (Type 1) reproduces the arpeggio of
2 the original JUNO-60 (default value).
*1 Only when using the K-25m keyboard unit (sold separately)
Specifies the time until the LED DEMO is shown. Default: 3 min
*2 This setting applies to keyboard performance using the step buttons and to performance using the
K-25m keyboard unit.
RETURNING TO THE FACTORY SETTINGS
Here's how to return the JU-06A to its factory-set state.
1. While holding down the BANK [1] button, turn on the power. The ARPEGGIO [ON/OFF] button blinks.
If you decide to cancel the factory reset, turn o ff the power.
2. Press the ARPEGGIO [ON/OFF] button to execute the factory reset. 3. When all buttons blink, turn the
JU-06A’s power o
ff , then on again.
DATA BACKUP/RESTORE
Backup
1. Connect your computer to the JU-06A’s USB port via USB cable.
2. While holding down the BANK [2] button, turn on the power.
It takes about 20 seconds to prepare the drive.
3. Open the “JU-06A” drive on your computer.
The backup files are located in the “BACKUP” folder of the “JU-06A” drive.
4. Copy the backup files into your computer.
5. After copying is completed, eject the USB drive.
Windows 8/7
Right-click on the “JU-06A” icon in “My Computer” and execute “Eject.”
Mac OS
Drag the “JU-06A” icon to the Trash icon in the Dock.
6. Turn the JU-06A power o ff .