Roland HP302, Owner'S Manual

Page: 63 / 92

65
Connecting to Other Devices
You can adjust only the volume of an audio file or music CD.
1.
Play back the audio file or music CD (p. 64).
2.
Hold down the [ ] button and press the [-] or [+]
button.
You can change the tempo of an audio file or a song from a music
CD.
1.
Press the [Display] button a number of times so the
“Song” and “Tempo“ indicator is lit.
2.
Press the [-] or [+] button.
If you select a different song or turn off the power, the tempo
will revert to a setting of “100.”
You can also change the playback pitch for a music CD song or an
audio file (Playback Transpose; p. 42).
1.
Play back the audio file or music CD (p. 64).
2.
While holding down the [Transpose] button, press the [-]
or [+] button.
* If you’ve selected a music CD song or audio file, using Playback
Transpose may affect the tonal character.
Sounds on a music CD or audio file that are heard from the center
(typically the vocal or melody instrument) can be minimized in the
playback.
1.
Play back the audio file or music CD (p. 64).
2.
Press the [Right] button so its light is turned off.
The volume of the melody or vocal will decrease.
* For some songs, the sound heard from the center may not
disappear completely.
To turn off the Center Cancel function, press the [Right] button.
The Center Cancel function will also be turned off when you
select a different song.
* For some songs, using Center Cancel may affect the tonal character.
You can connect a commercially available USB CD drive to the
HP305/HP302, and play back separately sold CD-ROMs created for
the VIMA (VIMA TUNES p. 83).
Songs on VIMA CD-ROM (VIMA TUNES) are programmed with
“recommended tones” suitable for each song.
When you select a song from a VIMA CD-ROM (VIMA TUNES),
recommended tones will be assigned to the HP305/HP302’s
[E. Piano], [Strings], and [Others] tone buttons, and these three
tone buttons will blink. When you press a flashing Tone button, the
recommended tone is then selected, enabling you to perform the
selected song using a tone matched to that song as it plays back.
You can set the HP305/HP302 so that the recommended tones are
automatically assigned or not assigned.
1.
Enter Function mode, choose “rtn” (p. 55).
2.
Press the [-] or [+] button to switch “On” or “OFF.”
This is set to “On” at the factory.
Adjusting the Volume of an Audio File or
Music CD
Setting
0 – 10
Changing the Tempo of an Audio File or
Music CD
Setting
75 – 100 – 125 (%)
Changing the Playback Pitch of a Song
(Playback Transpose)
Setting
-6 – 0 – 5 (semitone units)
Minimizing the Sounds in the Center
(Center Cancel)
Switching VIMA TUNES Recommended
Tones (Recommended Tone)
Setting Description
On
When you select a song from a VIMA CD-ROM (VIMA TUNES),
recommended tones will automatically be assigned to the
HP305/HP302’s [E. Piano], [Strings], and [Others] tone buttons.
OFF
The recommended tones are not used, and only the HP305/
HP302’s internal tones can be selected.
HP305_302_e.book 65 ページ ２０１０年１月５日 火曜日 午後１２時２分