9
Setting
About Sleep Mode
When ten hours have elapsed since the last operation
or audio input, the GR-D will enter sleep mode (power
conservation mode). From sleep mode, you can press
the pedal to return to normal mode.
*
Battery power continues to be consumed even in sleep
mode. To prevent battery consumption, turn off the power by
removing the plug from the OUTPUT L jack.
Disabling sleep mode
1.
While holding down the left pedal, turn
on the power (insert a plug into the
OUTPUT L jack).
2.
Continue holding down the left pedal
for five seconds.
The POWER indicator will blink.
3.
Release the left pedal; the GR-D will
resume normal operation.
Enabling sleep mode (default setting)
1.
While holding down the left pedal, turn
on the power (insert a plug into the
OUTPUT L jack).
2.
Within two seconds after the POWER
indicator lights up, step on the left pedal
two more times.
The POWER indicator will blink.
After two seconds, the GR-D will resume normal operation;
sleep mode will be enabled.
Restoring the Factory Settings
(Factory Reset)
Here’s how to restore the GR-D’s settings to their
factory-set condition.
*
When you execute “Factory Reset,” the settings you made will
be lost.
1.
While holding down the [WRITE] button,
turn on the power (insert a plug into the
OUTPUT L jack).
All MEMORY indicators (1–4) will blink.
2.
Press the [WRITE] button to execute
Factory Reset.
All MEMORY indicators (1–4) will blink rapidly. When Factory
Reset is completed, the GR-D will return to normal operation.
*
Never turn off the power while MEMORY indicators are blinking
rapidly.
Turning the FX On/Off
The GR-D includes spatial-type effects (FX) that
provide a pleasant sound even when you’re not using
any other equipment.
Here’s how to turn the FX on/off.
1.
While holding down the right pedal,
turn on the power (insert a plug into the
OUTPUT L jack).
The SOLO indicator will blink.
2.
Press the [SELECT] button to turn the FX
on/off.
The FX is on when the first indicator is lit,
and off when the indicator is unlit.
3.
Press the [WRITE] button to decide the
setting.
