background image

2

Main Features

Dedicated effects unit for the V-Guitar/GK pickup

The GR-D is an effects unit specifically designed for the GK pickup, which individually extracts the signal of each string. 

Since each string’s signal is processed individually, you’ll be able to experience completely new sounds that could not 

be produced by guitars with conventional pickups of the past.

Richly expressive sounds

The GR-D processes the signal from each string individually, generating rich and unprecedentedly expressive 

distortion sounds.

In addition to distortion that does not get muddy when you play a chord, you also get analog-synth-type lead sounds 

that go well beyond the boundaries of conventional effects units. All the distinctive features of a guitar performance 

will be fully expressed, without any sense of latency (the timing discrepancy between your playing and the sound).

Simple operation

Operation is effortless. Just twist the knobs and press the pedals to obtain cutting-edge V-Guitar sounds.

Memory function

Four effects settings can be stored (in memory) in the unit. You can switch memory slots using the [S1] [S2] buttons of 

the GK pickup for instant sound selection during your live performances.

Check the following points before using the GR-D

You’ll need a GK-compatible guitar

In order to use the GR-D, you’ll need a guitar equipped with a GK pickup or a GK-compatible guitar such as the 

GC-1 V-Guitar. (Hereafter, we’ll refer to such a guitar as a “GK-compatible guitar.”)

The GR-D does not support basses (GK-3B).

You must set the GK pickup select switch to the “MIX” position!

If the switch is set to any position other than MIX, the unit won’t operate correctly (there will be no sound).

GK-3 users

V-Guitar GC-1 users

You must set this to the center (MIX) position!

• 

Roland is either registered trademark or trademark of Roland Corporation in the United States and/or other countries.

• 

Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.

• 

This product contains eCROS integrated software platform of eSOL Co.,Ltd. eCROS is a trademark of eSOL Co., Ltd. in Japan.

Copyright © 2013 ROLAND CORPORATION 

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

Summary of Contents for GR-D













Reviews: