Roland E-50, E-60 Page 181 Owner'S Manual Download | Manualshive

Page: 181 / 220

background image

Format

E-60/E-50 Music Workstation

r

181

You are asked whether it is OK to overwrite all files
on the destination media (“TO”) that have the same
file names as the files you are about to copy.

(12) Press the

[YES]

field if it is OK to overwrite files

with the same names on the destination media.

Press the

[NO]

field if files on the source (“FROM”)

media that have the same name as existing files on
the destination (“TO”) media should not be copied
(only files with “original” names will be copied in that
case).

The data are copied and a message confirms the end
of the operation.

Note:

Never remove the floppy disk or memory card while the

operation is in progress. Wait for the confirmation to appear
before returning to business as usual.

(13) Press the

[EXIT]

button to return to the main page.

Note:

If the (remaining) storage capacity is smaller than the

size of the files you wish to copy, the E-60/E-50 automatically
stops the operation without displaying a message as soon as
the media is full. Always check the contents of the destination
media immediately after the copy operation to make sure that
all required files have been copied.

Format

This function allows you to format the inserted floppy
disk or memory card. For safety reasons, you cannot
format the internal memory (because it also contains
the E-60/E-50’s operating system).

It would be a good idea to also format floppy disks for-
matted for MS-DOS®, because that speeds up data
access.

Memory cards must always be formatted on

the E-60/E-50:

during formatting, the E-60/E-50

indeed also creates a number of folders where your var-
ious files will be stored.

(1) Defeat the disk’s or memory card’s write protection

(if available):

(2) Insert the floppy disk into the drive or the memory

card into the PCMCIA slot.

(3) Press the

[DISK&MEDIA]

button.

(4) Press the

[FORMAT]

field.

The display changes to:

(5) On the display page that appears now, press the

[EXTERNAL¥MEMORY]

or

[FLOPPY¥DISK]

field.

This obviously depends on whether you inserted a
floppy disk or a memory card.

The display now responds with:

(In the case of a floppy disk, the “External Memory”
message will read “Floppy Disk”, of course.)

(6) Press the

[YES]

field to format your disk/card.

Press

[NO]

or

[Back]

to return to the FORMAT display

page without formatting.

(7) Wait for the confirmation to appear, then press

the

[EXIT]

button to return to the main page.

Note:

Never remove the floppy disk or memory card while the

operation is in progress. Wait for the confirmation to appear
before returning to business as usual.

Floppy disk: Close the little “window” (page 11).

Memory card: See its owner’s manual (this depends on

the kind of card you are using).

E-60_50_OM_UK.book Page 181 Thursday, June 22, 2006 10:06 AM

«
...
179
180
181
182
183
...
»

Summary of Contents for E-50, E-60





























































































































































































































Reviews:

No comments

Related manuals for E-50, E-60

Brand: Campbell Pages: 25

Brand: Larson Davis Pages: 2

Brand: G-Tek Pages: 27

Brand: Candela Pages: 4

Brand: dacell Pages: 22

Network Card-MS

Brand: Eaton Pages: 26

Brand: Gardner Bender Pages: 4

Brand: GAPS Pages: 36

Brand: yellow jacket Pages: 26

Brand: palintest Pages: 14

Clavinova CVP-601

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 28

Pasport PS-2138

Brand: Pasco Scientific Pages: 26

Brand: Van Walt Pages: 2

Brand: Omega Pages: 22

EA Heightmaster +

Brand: PROLEC Pages: 38

Brand: TE Connectivity Pages: 3

Rangemaster CRF 1000

Brand: Leica Pages: 118

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands