Roland cakewalk A-300PRO Owner'S Manual Download | Manualshive

Page: 77 / 92

background image

77

Troubleshooting

Check the power management settings

You may be able to eliminate clicks and pops by changing your system’s power
management settings.

➝

“Power management settings” (p. 81)

Try updating the driver of your display adaptor (Windows)

You may be able to eliminate clicks and pops by updating the driver for the display
adaptor installed in your computer.

Have you set the system’s “Performance” setting? (Windows)

You may be able to solve the problem by changing the “Performance” setting of the
system.

➝

“System “Performance” settings (Windows)” (p. 82)

Could other software programs be running?

Close software that you’re not using.
If the window of a Windows program has been closed but it is still shown in the taskbar,
that program is still running. Close all unneeded software that’s shown in the taskbar.

Have you tried Windows Update or Microsoft Update? (Windows)

Try using Windows Update or Microsoft Update (provided by the Microsoft
Corporation) to update your system to the latest version.

In the driver settings dialog box, try selecting the “Light Load” check

box

To change or check this setting, proceed as directed in “Changing or verifying the
driver settings (Windows)” (p. 80).
Changes to this setting will take effect after you turn the A-PRO’s power off, then on
again. Unless you are experiencing problems, you should leave this check box cleared
(the default state).

Try disabling the LAN

In your computer’s Device Manager, try disabling LAN (wired/wireless).
If this eliminates the clicks and pops, it may be that updating your LAN driver or BIOS
may solve the problem. Check whether updated software is available.

Could you have connected the A-PRO to a USB hub?

Try connecting the A-PRO directly to a USB connector on your computer.

Are you using the included USB cable?

You must use the included USB cable when using the A-PRO. Some commercially
available USB cables do not meet the requirements of the USB standard, and this may
prevent the A-PRO from operating correctly.

Could you have updated the Mac OS X software while A-PRO was

connected?

It has been found that clicks or pops can occur if you performed a Mac OS X software
update while the A-PRO was connected. If so, install the driver once again.

Problems when Playing

Playback contains clicks, dropouts, or other problems

A-300_500_800C_e.book 77 ページ２０１０年２月２２日　月曜日　午後９時１３分

«
...
75
76
77
78
79
...
»

Summary of Contents for cakewalk A-300PRO





























































































Reviews:

No comments

Related manuals for cakewalk A-300PRO

CT6 SUPER CRUISE 2018

Brand: Cadillac Pages: 8

Brand: Handy Tech Pages: 39

KEYBPTZ3DPJ-LAN

Brand: XtendLan Pages: 34

CAMERA LINKT CLT-351L

Brand: Pyramid Imaging Pages: 49

Refresh-o-mat HD

Brand: Waeco Pages: 300

Brand: Polar Electro Pages: 30

Brand: Korg Pages: 419

Brand: Korg Pages: 11

BOOKMAN COL-640

Brand: Franklin Pages: 28

Brand: Trust Pages: 2

Brand: Trust Pages: 44

Brand: S-MANIA Pages: 3

Brand: Peavey Pages: 161

CleanBoard H+K 65303 Series

Brand: keywi Pages: 2

Elite Gamer GHO5T

Brand: Sentey Pages: 12

Brand: AmazonBasics Pages: 87

KEYSTUDIO KeyStudio 49i

Brand: M-Audio Pages: 12

Brand: E-Mu Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands