_______________________________________
PANEL DESCRIPTIONS
1 . Guitar Synth Input:
Input for 24-pin
style G-Series guitar cable.
2 . Synth
Output
Connector:
The
modern.
13-pin
synthesizer
output
connector.
3 . Synth Footswitch:
This switch turns
on and off the volume level for the
Synthesizer. The associated RED LED
will glow when the synthesizer output is
on.
4 . Guitar Footswitch:
This switch turns
on and off the volume level for the Guitar.
The associated GREEN LED will glow
when the synthesizer output is on.
5 . Guitar Line In 1/4”:
With only the 24-
pin cable plugged in, the level of the
standard guitar sound is always at
maximum. If you want to vary the level of
the standard guitar sound, then a second
cable needs to be connected from the
1/4” Guitar Output jack on the Guitar
Controller to the 1/4” Guitar Input jack on
the
BX-13
. This is the same design used
by the Roland BC-13.
_______________________________________
SWITCH FUNCTIONS
The BX-13 changes some the functions of
vintage G-Series controllers to match new, 13-pin
functions.
• Master Volume
knob is now for Guitar
Volume only. This knob changes the
volume of the Guitar when a cable is
hooked from the standard 1/4” output
jack on the guitar to the
BX-13
guitar
input.
• Guitar Tone
Knob controls the tone of
the guitar’s normal sound.
• Filter Knob
, or CV#1, becomes the
volume control for the Synthesizer.
• Mode Switch
becomes SW1 and SW2.
_______________________________________
SPECIFICATIONS
BX-13 Dual Bus Converter:
• Connectors:
One 24-pin input
connector, one 13-pin output connector,
1 1/4” standard phone jacks for standard
guitar input.
• Dimensions:
6(W) x 8(D) x 2 3/4(H)
inches
• Weight:
1 lbs 3 oz
v1.0 08.09.2005
© copyright August 2005
www.gr300.com
