Menu options
72
r
Backing Keyboard BK-5 OR
Perform Next
Song
Off, On
At the end of the cur-
rent song, the next
song in the Perfor-
mance List starts auto-
matically. If the
Performance List step
refers to a rhythm, the
rhythm in question is
loaded, but you will
need to start manually
by pressing the [START/
STOP] button.
UP1 EQ/MFX
Link
Off, On
If you select “on”, the
BK-5 OR selects suit-
able MFX and equalizer
settings for each Tone
you assign to the
Upper1 part.
Rec Audio Level –24, –18, –12,
–6, +0 dB
Allows you to set the
recording level for
your own perfor-
mances (see p. 55). The
setting of the [VOL-
UME] knob does not
affect the recording
level. (Default setting:
+0dB)
Rec Audio Sync Off, On
Off
: Choose this set-
ting when you want to
start recording before
starting rhythm or
song playback.
On
: Choose this set-
ting when you want to
be able to start record-
ing simultaneously
with rhythm/song
playback. When you
choose this setting,
pressing the [AUDIO
REC] button will stop
both playback and the
recorder.
Audio In Level
0~127
Allows you to set the
input level of the sig-
nals received via the
INPUT (STEREO) socket.
See also page 20.
Audio In Center
Canc
Off, On
Select “On” if the “Cen-
ter Cancel” function
(see p. 45) should also
affect the signals
received via the AUDIO
INPUT sockets.
Parameter
Setting
Explanation
USB Driver
Generic,
Original
Generic
: Choose this if
you want to use the
standard USB driver
that was included with
your computer. Nor-
mally, you should use
this mode.
Original
: Choose this
if you want to use a
USB driver down-
loaded from the
Roland website
(www.roland.com).
Recall MIDI Set
Off, Key/
Rhythm, PK
Series, Song,
User1, User2,
User3, User4,
User5, User6,
User7, User8
This parameter selects
the MIDI Set whose
settings are loaded
when the BK-5 OR is
switched on. Select
“Off” if no MIDI Set
should be recalled
when the BK-5 OR is
switched on.
Auto Off*
Off,
10 (5)
30 (15)
240 (30)
This parameter allows
you to cause the
BK-5 OR to switch
itself off after the
selected number of
minutes if you are not
using it. The default
setting is “30”. Select
“Off” if you prefer not
to use this function.
The values in paren-
theses indicate when
the pop-up count-
down appears.
Visual Ctrl
Mode
MVC, V-LINK
This parameter allows
you to select the visual
control mode. The
option to select
depends on the mes-
sages supported by the
external device: MIDI
Visual Control (MVC) or
V-LINK.
Version Info
n.nn
Shows the version
number of the
BK-5 OR’s operating
system.
[*] When the BK-5 has been switched off by this function, you
need to press the [POWER] button, wait a few seconds, then
press the button again to switch the BK-5 back on. (Do not
switch it on too quickly.)
Parameter
Setting
Explanation
BK-5or_US.book Page 72 Monday, February 13, 2012 12:19 PM
