Roland BK-5OR, Owner'S Manual

Page: 65 / 134

‘Performance Edit’ parameters
Backing Keyboard BK-5 OR
r
65
Exp. Pedal All Parts On
If you are not sure which rhythm parts still receive
expression messages, and if you want all to receive
them, you can select this field and press the [ENTER/
SELECT] button.
Exp. Pedal All Parts Off
If you are not sure which rhythm parts still receive
expression messages, and if no rhythm part should
receive them, you can select this field and press the
[ENTER/SELECT] button.
Split
This page allows you to set two keyboard-related
parameters. It can be selected using [MENU] button ‰
“Performance Edit” ‰ “Split”.
NOTE
This page can also be selected by pressing and holding the
[SPLIT] button.
Split Point
The “Split Point” parameter allows you to set the split
point.
NOTE
After pressing the [ENTER/SELECT] button, you can set the
split point either by rotating the [CURSOR
÷
VALUE] dial or
by simply pressing the corresponding key on the keyboard.
Lower Hold
This parameter allows you to set the Hold function
for the LWR part.
If you set this parameter to “On”, the notes of the
LWR part go on sounding until you play other notes
in the left keyboard area. (This function is only avail-
able while the [SPLIT] button lights.)
If you select “Off”, the LWR part stops sounding as
soon as you release all keys in the left area.
Scale Tune Switch
This parameter can be selected using [MENU] button
‰ “Performance Edit” ‰ “Scale Tune Switch”.
Scale Tune
This parameter can be selected using [MENU] button
‰ “Performance Edit” ‰ “Scale Tune”.
This parameter allows you to change the tuning of all
notes of one octave, which may come in handy to
create oriental tunings.
Parameter Setting
Split Point C#2~B6
Parameter Setting
Lower Hold Off, On
Parameter Value Explanation
Upper Off, On Select “On” if the “Scale
Tune” settings (see below)
should apply to the
Upper1, Upper2 and Mel-
ody Intell parts.
Lower Off, On Select “On” if the “Scale
Tune” settings (see below)
should apply to the Lower
part.
Rhythm Off, On Select “On” if the “Scale
Tune” settings (see below)
should apply to the
Rhythm parts.
Parameter Value Explanation
C~B
(each note can
be set individu-
ally) -64~0~+63 Changes the pitch of
the notes C~B in steps
of 1 cent. The value
that you specify is
applied to all notes of
the same name. If you
change the tuning of
the “C”, that value is
added to, or subtracted
from, all Cs (C1, C2, C3,
etc.). (“–50” means that
the note in question is
tuned a quarter tone
down.)
BK-5or_US.book Page 65 Monday, February 13, 2012 12:19 PM