Panel description
14
r
Backing Keyboard
BK-5 OR
c
PART LWR and UP2 buttons
These buttons are used to switch the real-time parts
(Lower and Upper2) on and off.
NOTE
The Upper1 part (UP1) is always active and cannot be
switched off.
d
ONE TOUCH button
This button is used to enable the recall of One Touch
memories. Pressing and holding it calls up a display
page where you can edit and save One Touch memo-
ries.
NOTE
Use the TONE buttons [1]~[4] to select or deselect a One
Touch memory (see p. 33).
e
MELODY INTELL button
This buttons is used to add an automatic counter-
melody (second or third voice) to your solos or melo-
dies. Pressing and holding it calls up a display page
where you can view the “Melody Intelligent” parame-
ter.
f
NUMERIC button
Press this button if you want to use the TONE buttons
to enter numeric values (see p. 26).
g
TONE buttons (Tone selection)/[0]~[9] (numeric but-
tons)
These buttons allow you to select Tones by category
(page 25).
You can also use them to input numeric values. To do
so, first activate the NUMERIC button
.
Pressing and holding any of these buttons locks the
Tone (page 57).
BK-5or_US.book Page 14 Monday, February 13, 2012 12:19 PM