DP
Direct Playback Setting Output
Function: Direct Playback setting output
Syntax:
stxDP:a,b,c, .... ,q;
(RS-232C, Command format: Type 2)
Syntax:
DP:a,b,c, .... ,q
(Telnet, Command format: Type 2)
a: Card in slot
0 Card in slot A
1 Card in slot B
2 Card in slot C
3 Card in slot D
b – q: Phrase number which you assigned to control input pin
b
CH1
c
CH2
|
|
q
CH16
Note:
For unused direct channels, “----” is output. “PLAY” will be output for the direct channel
which plays back the phrase shown in the display. (--> refer to 4.2.4 DQ command)
CE
Program (Count) Playback Setting Output
Function: Program (Count) Playback setting output
Syntax:
stxCE:a,b,c,c, .... ,c;
(RS-232C, Command format: Type 2)
Syntax:
CE:a,b,c,c, .... ,c
(Telnet, Command format: Type 2)
a: Card in slot
0 Card in slot A
1 Card in slot B
2 Card in slot C
3 Card in slot D
b: Program Playback patterns (1 - 5)
c: Phrase number to be played back (up to 100 phrases)
Note:
refer to 4.2.4 UQ command
AR-3000SD (Ver.1.00) Command Reference - 64
