PS
Pattern Phrase Settings
Function: Pattern Phrase settings
Syntax 1: (Sequence or Random 1)
stxPS:a,b,c,d,e,f,g,d,e,f,g, .... ,d,e,f,g;
(RS-232C, Command format: Type 2)
PS:a,b,c,d,e,f,g,d,e,f,g, .... ,d,e,f,g
(Telnet, Command format: Type 2)
a: Pattern Phrase number
b: Pattern Phrase Playback mode
0
Sequence
1
Random
1
c: Reserved (Only '0')
d: Playback Sequence
e: Phrase number to be played back
f: Playback Volume (10 – 100 : 10% - 100%)
g: Delay Time (0S0 - 59S9)
Syntax 2: (Random 2 or Random 3)
stxPS:a,b,c,d,e,f,g,d,e,f,g, .... ,d,e,f,g;
(RS-232C, Command format: Type 2)
PS:a,b,c,d,e,f,g,d,e,f,g, .... ,d,e,f,g
(Telnet, Command format: Type 2)
a: Pattern Phrase number
b: Pattern Phrase Playback mode
2
Random
2
3
Random
3
c: Interrupt phrase interval (1 – 25)
d: Playback Sequence (1 – 100 : phrases , 101 – 128 : interrupt phrases)
e: Phrase number to be played back
f: Playback Volume (10 – 100 : 10% - 100%)
g: Delay Time (0S0 - 59S9)
*On specification, delay time cannot be set for interrupt phrase. Please send one
value of 0S0-59S9.
Note:
A maximum of 128 phrases can be specified in one line.
For the pattern phrase number, specify a phrase number where nothing is recorded.
For the playback phrase number, Audio phrases, MIDI phrases, and pattern phrases can
be specified.
SS
Song Phrase Settings
Function: Song
Phrase
settings
Syntax:
stxSS:a,b,c,b,c, .... ,b,c;
(RS-232C, Command format: Type 2)
stxSS:a,b,c,b,c, .... ,STOP, c;
(RS-232C, Command format: Type 2)
Syntax:
SS:a,b,c,b,c, .... ,b,c
(Telnet, Command format: Type 2)
SS:a,b,c,b,c, .... ,STOP, c
(Telnet, Command format: Type 2)
a: Song Phrase number (A1-A1000, B1-B1000)
b: Phrase number to be played back / STOP (To specify the ending point)
c: Start point of phrase / End point of song phrase
Note:
A maximum of 100 phrases can be specified in one line.
For the song phrase number, specify a phrase number where nothing is recorded.
For the playback phrase number, Audio phrases can be specified.
The number of digits for **F (frame) increases according to the value of MTC type.
AR-3000SD (Ver.1.00) Command Reference - 46
