4.2 Details of Commands Sent from the External Device (Computer) to the AR-3000SD
4.2.1 Control
Commands
Playback Commands
PA
Specifying the Playback Phrase
Function: Specifying the playback phrase
Syntax:
stxPA:a,a, ..... ,a;
(RS-232C, Command format: Type 2)
Syntax:
PA:a,a, ..... ,a
(Telnet, Command format: Type 2)
a: Phrase number
Example)
PA:A1,A3,B5
Specify A0001 and A0003 and B0005 as the playback phrases.
The specified phrases are consecutively played back from the left.
Note:
A maximum of 100 phrases can be specified in one line.
Be sure that the phrase numbers are registered (i.e., for which data exists).
PL Playback
Start
Function: Playback
start
Syntax:
stxPL;
(RS-232C, Command format: Type 1)
Syntax:
PL
(Telnet, Command format: Type 1)
Note:
If the playback phrase has not been specified, the default value (A0001) will be used. The
phrases specified by the PA command will be played back consecutively.
* If Dual Mono Mode is ON
Since phrases will be played back from the L or the R output depending on whether they
are odd or even numbered phrases, phrases specified by the PA command will
automatically be assigned to the playback memory; odd-numbered phrases will be played
back from the L output, and even-numbered phrases will be played back from the R
output. It is not possible to playback the L and R channels independently.
Example)
PA:A0001,A0003,A0007,A0006,A0010
When Dual Mono Mode is on and the above phrases are specified with the PA command,
the phrases are played back in sequence. Phrases A0001, A0003 and A0007 are played
through the left channel and phrases A0006 and A0010 are played through the right
channel.
AR-3000SD (Ver.1.00) Command Reference - 32
