PAGE 10
59307_59308_59310_IN_Rev A • Questions? (800) 234-6992 • RolaProducts.com
ENGLISH
ASSEMBLY INSTRUCTIONS
59310 Add-on Unit
ADD-ON CARRIER ASSEMBLY
1. Assembly for add-on unit will be in the
OPPOSITE
direction of the base
unit that this add-on unit is being connected to.
FIG 1
.
2. For step 2, refer to page 4 “CENTER SUPPORT ASSEMBLY” steps 2
through 6.
3. For step 3, refer to page 5 “ARM ASSEMBLY”.
1
Add-on unit:
Front wheel tube
with cradle-left
D
Base unit:
Front wheel
tube with
cradle-right
D
ATTACHING ADD-ON UNIT TO BASE UNIT
1. Remove caps from base unit.
FIG 2
.
2. Engage tab on add-on unit with slot on base unit.
FIG 3
.
3. Secure with (2) M12x1.75x100 button head screws (T), (2) 12mm Lock
washers (H) and (1) add-on support plate (S).
FIG 4 & 5
.
4. Tighten screw to 35 ft. lbs. with supplied allen wrench (K).
LOADING BIKES TO ADD-ON UNIT
1. For this step, refer to pages 8 & 9 “LOADING BIKES”.
2
3
4
5
Tab
Slot
Add-on
support plate
Button head screw
S
T
Lock
washer
H
