ATTENTION!
The following mounting instructions
must be observed!
• Before mounting, compare the speci-
fications for mains voltage/frequency
and current consumption on the name-
plate with those of the local mains.
• Before installing the timer, remove or
disable all wiring and equipment not
required for operation.
Important!
According to DIN EN 13659, care must
be taken to ensure that the displace-
ment conditions specified for the
hangers in accordance with EN 12045
are complied with, i.e. that hangers
are locked laterally. According to
DIN VDE 0700, the installation of
permanently installed devices must
include a disconnecting device for
each phase. Switches with a contact
opening width of at least 3 mm (e.g.
LS switches, fuses or FI switches) are
considered to be disconnecting de-
vices. Check the installation regularly.
If there is any damage (e.g. signs of
wear, damaged cables and springs or
misaligned end positions), do not use
the installation.
IMPORTANT!
Disposal instructions!
European Directive 2012/19/EU (WEEE)
Our electrical and
electronic products
are marked with a
crossed-out wheeled
garbage can, which
indicates that these
products and any
batteries they may
contain must be
collected separately
at the end of their service life and not
be disposed of with other household
waste.
www.rojaflex.com
5
General safety instructions