rojaflex HSR-15, Operating Manual

Page: 5 / 12

Function review
5
www.rojaflex.com
Display
Roller position
indicator
a
Channel
display
K1 K2
UP Battery
compartment
STOP
DOWN DIP switch*
single/bi-
directional
Programming
button
15 channel remote controller HSR-15
Individual channels (1–15) can be switched with K1 and K2
buttons.
The channel highlighted in black is active.
When letter “a” (the indicator after channel 15) is
highlighted, then the group controlling is active.
Controlling all programmed receivers.
The remote controller
back with a cover open
The “DIP switch” can be used to choose between
“SI” (single-directional communication) and “BI”
(bi-directional communication), depending on the
receiver type (see the receiver operating manual).
.
Battery installation/replacing
Depending on the transmitter model, the battery is delivered separately in the packaging, or is installed and
secured with a protective film against discharging. Open the back cover pressing it slightly down*, remove the
protective cover and install the battery (as shown) with the + (plus) side up.
Then install the back cover.
Battery status
indicator*
* depending on a model
Remove protective
film.
* Depending on a model, the back
cover can be held in place with a
screw.
The description of keys can differ, depending on a model:
K1= K- (minus) K2= K+ (plus)
SI
P2
BI
Depending on the switching
frequency, we recommend
replacing the batteries at least
every 2 years
.
Do not dispose of batteries
together with household
garbage! Deliver to an
appropriate disposal site
.