![rojaflex HSR-15 Operating Manual Download Page 9](http://html1.mh-extra.com/html/rojaflex/hsr-15/hsr-15_operating-manual_1478663009.webp)
Programming and setup
9
SI
P2
BI
SI
P2
BI
Further information is available in relevant operating manuals of Rojaflex drives and radio
receivers
2.
Adding the remote controller
Select the previously
programmed channel in
the ALREADY ASSIGNED
transmitter by pressing
the K1 (or K2) button.
Then in a NEWLY coded
transmitter, select a
channel that you want to
add, by pressing the K1 (or
K2) button (the selected
channel is highlighted in
black)
In the previously
programmed remote
controller, press the
programming button
P2 (on the back) thrice.
Then in the currently
programmed remote
controller, press the
programming button
P2 (on the back) once.
The drive (roller blind) will move
UP/DOWN for a moment and/or
the receiver will emit a sound.
OK - the remote controller was
added.
Important:
In the SI (Single-Direktional System / Single-directional communication) systems,
the P2 button of the already programmed remote controller is pressed only twice!
This applies to MLSF/MLMMF drives – and external receivers REHK-1 and RUE-UP.
An operating manual/drive of a given receiver/driver.
Summary of Contents for HSR-15
Page 10: ...10 www rojaflex com Notes ...
Page 11: ...Notes 11 www rojaflex com ...