8
Programming and setup
Each time, the button must be pressed within 4 seconds!
Otherwise, the system will automatically leave the programming mode.
1.
Programming (learning) mode - a radio-controlled drive or an external radio receiver
A radio receiver (a radio- controlled drive Rojaflex or an external radio receiver Rojaflex), to which a
remote controller (transmitter) has to be assigned should be put into the programming mode as provided
for in its programming mode instruction.
1.
Remote controller assignment - HSR-15
By pressing the K2 or K1
button, select the required
channel (the selected
channel is highlighted in
black)
With the group function
(when all channels are
highlighted), the channels
cannot be assigned jointly or
separately!
Put the receiver (a
drive/external receiver) into
the programming mode, as
provided for in the manual
Press the programming
button P2 (on the back)
twice.
Press the button UP once.
The drive (roller blind) will
move UP/DOWN for a
moment and/or the
receiver will emit a sound.
OK– First programming
performed correctly!
To assign new receivers and
channels, start the entire
procedure from the beginning.
Check the operation by pressing UP/STOP/DOWN buttons.
When the drive moves in the opposite direction (the roller blind/drive moves down when the UP
button is pressed), restart the process and press the DOWN, not the UP button after pressing the
P2 button.
This way the drive direction is changed.
SI
P2
BI
Summary of Contents for HSR-15
Page 10: ...10 www rojaflex com Notes ...
Page 11: ...Notes 11 www rojaflex com ...
