rojaflex HSR-1, Operating Manual

Page: 7 / 12

Programming and setup
7
www.rojaflex.com
Each time, the button must be pressed within 4 seconds!
Otherwise, the system will automatically leave the programming mode.
SI
P2
BI
1. Programming (learning) mode - a radio-controlled drive or an external radio receiver
A radio receiver (a radio- controlled drive Rojaflex or an external radio receiver Rojaflex), to which a
remote controller (transmitter) has to be assigned should be put into the programming mode as provided
for in its programming mode instruction.
2. Remote controller assignment - HSR-1
Put the receiver (a
drive/external receiver) into
the programming mode, as
provided for in the manual .
Press the programming
button P2 (on the back)
twice.
Press the button UP once
.
The drive (roller blind) will move
UP/DOWN for a moment and/or
a receiver will emit a sound.
OK– First programming
performed correctly!
Check the operation by pressing UP/STOP/DOWN buttons.
When the drive moves in the opposite direction (the roller blind/drive moves down when the UP
button is pressed), restart the process and press the DOWN, not the UP button after pressing the
P2 button.
This way the drive direction is changed.