rojaflex HSR-1, Operating Manual

Page: 9 / 12

9
www.rojaflex.com
Programming and setup
SI
P2
BI
SI
P2
BI
Further information is available in relevant operating manuals of Rojaflex drives and radio
receivers.
3. Adding the remote controller
E.g.: HSR-5
(does not apply to HSR-1)
Select the previously
programmed channel in the
ALREADY ASSIGNED
transmitter by pressing the
K1 (or K2) button.
Then in a NEWLY coded
transmitter, select a
channel that you want to
add, by pressing the K1 (or
K2) button (a LED is lit by
the selected channel).
On the previously
programmed remote
controller, press the
programming button P2 (on
the back) thrice.
Then in the currently
programmed remote
controller, press the
programming button P2
(on the back) once.
The drive (roller blind) will
move UP/DOWN for a
moment and/or the receiver
will emit a sound.
OK - the remote controller was
added.
Important: In the SI (Single-Direktional System / Single-directional communication) systems,
the P2 button of the already programmed remote controller is pressed only twice!
This applies to MLSF/MLMMF drives – and external receivers REHK-1 and RUE-UP.
An operating manual/drive of a given receiver/driver.