ROHS EmCORE-i2702 User Manual Download Page 47

Page: 47 / 73

- -

BIOS

Boot Up NumLock Status

It allows you to activate the NumLock function after you power up the

system.

Setting: Off, On (Default).

Boot Other Device

It allows the system to search for an OS from other devices other than the

ones selected in the First/ Second Boot Device.

Setting: Disabled (Default), Enabled.

First Boot Device

These fields determine the drive that the system searches first for an operating

system. The options available include

Setting: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,

USB-CDROM, LAN and Disabled.

Quick Power On Self Test

When enabled, it speeds up the Power On Self Test (POST) after the system

is turned on.

If it is set to Enabled, BIOS will skip some items.

Setting: Disabled, Enabled (Default).

Hyper-Threading Technology

If enabled, when your processor supports Hyper-Threading Technology.

Setting: Disabled, Enabled (Default)

Second Boot Device

These fields determine the drive that the system searches second for an

operating system. The options available include

Setting: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,

USB-CDROM, LAN and Disabled.

Summary of Contents for EmCORE-i2702










































































Search results

Summary of Contents for EmCORE-i2702

Reviews:

Related manuals for EmCORE-i2702

Brands by name

Popular brands

ROHS EmCORE-i2702, User Manual

Search results

Summary of Contents for EmCORE-i2702

Reviews:

Related manuals for EmCORE-i2702

Brands by name

Popular brands