ROHS EmCORE-i2702, User Manual

Page: 65 / 73

- 61 -
BIOS
6Fh Initialize floppy controller; Setup floppy related fields in 40:hardware
70h Reserved
71h Reserved
72h Reserved
7h
Enter AWDFLASH.EXE if: AWDFLASH.EXE is found in floppy dive and
ALT+F2 is pressed
7h Reserved
7h Detect and install all IDE devices: HDD, LS120, ZIP, CDROM...
76h Reserved
77h Detect serial ports and parallel ports
78h Reserved
79h Reserved
7Ah Detect and install coprocessor
7Bh Reserved
7Ch Reserved
7Dh Reserved
7Eh Reserved
7Fh
Switch back to text mode if full screen logo is supported: if errors occur,
report errors & wait for keys, if no errors occur or F1 key is pressed
continue - Clear EPA or customization logo
80h Reserved
81h Reserved
82H Call chipset power management hook: Recover the text fond used by
EPA logo (not for full screen logo), If password is set, ask for password
8H Save all data in stack back to CMOS
8h Initialize ISA PnP boot devices
8h
Final USB initialization; NET PC: Build SYSID structure; Switch screen
back to text mode; Set up ACPI table at top of memory; Invoke ISA
adapter ROM’s; Assign IRQ’s to PCI devices; Initialize APM; Clear
noise of IRQ’s
86h Reserved
87h Reserved
88h Reserved
89h Reserved
90h Reserved
91h Reserved
92h Reserved
9h Read HDD boot sector information for Trend Anti-Virus code
9h
Enable L2 cache; Program boot up speed; Chipset final initialization;
Power management final initialization; Clear screen and display
summary table; Program K6 write allocation; Program P6 class write
combining
9h Program daylight saving; Update keyboard LED and typematic rate
96h Build MP table; Build and update ESCD; Set CMOS century to 20h or
19h; Load CMOS time into DOS timer tick; Build MSIRQ routing table
FFh Boot attempt (INT 19h)