10
ROHO AGILITY Back System Fixed Hardware Operation Manual
Seat Depth and Angle Adjustment
Warnings:
-
If performed correctly and with caution, seat depth and angle adjustments may be made while
the individual is in the wheelchair. If you find seat depth and angle adjustments too difficult or
unsafe to make while the individual is in the wheelchair, have the individual transfer safely out of
the wheelchair.
-
If you choose to adjust the seat depth and angle of the AGILITY while the individual is seated in the
wheelchair, you must first take the following safety precautions:
9
Make sure the wheelchair wheels are locked.
9
Make sure that all hardware is securely tightened. Refer to the recommended torque
specifications.
Note: Before you adjust the seat depth and the angle of an AGILITY, install the AGILITY on the
wheelchair. See
agility i
nStallation
.
To Adjust the Seat Depth
1)
Use the Allen wrench to loosen
the depth/angle adjustment bolts
approximately three (3) full rotations.
2)
Slide the back shell forward or
backward to the desired depth. Note:
If
the triangle bracket will not slide, see
t
roubleShooting
.
3)
IMPORTANT! To make sure the
depth positions on both sides are equal,
compare the markers on the tops of the
triangle brackets.
4)
If the AGILITY is not yet adjusted to
the desired angle, continue to the next
section,
t
o
a
djuSt
the
a
ngle
.
5)
If the AGILITY is already adjusted
to the desired angle: While you hold
the back shell in position, use the
Allen wrench to tighten the right and
left depth/angle adjustment bolts,
turning until snug + one-quarter
turn. Note: If a torque wrench is
available, tighten the bolts to 60
± 4 inch-pounds (7 ± 0.5 Newton-
meters).
Markers for Seat Depth
Markers for Angle