Espresso maker R-990
EN
12
After finish preheating, hold and press double cup coffee switch and steam switch for 3
seconds at the same time, and their corresponding indicators will blink for 3 times, then
the factory reset is finished.
CLEANING AND MAINTENANCE:
1.
Cut off power source and let the coffee maker cool down completely before
cleaning.
2.
Clean housing of coffee maker with moisture-proof sponge often and clean
water tank, drip tray and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the
housing in water for cleaning.
3.
Detach the metal funnel by turning it clockwise, get rid of coffee residue
inside, then you can clean it with cleanser, but at last you must rinse with
clear water.
4.
Clean all the attachments in the water and dry thoroughly.
CLEANING MINERAL DEPOSITS
1.
A descaling prompt will occur automatically after working for 500 cycles
cumulatively, at that time, all the indicators will quickly blink for 5 times at the
same time after preheating is finished. And the appliance will become normal
again after the descaling is finished.
2.
Cancel descaling alarm and standby mode,Press the button 3s of cup of
coffee.
3.
Fill the tank with water and descaler to the MAX level ( the scale of water and
descaler is 4:1, the detail refers to the instruction of descaler. Please use
“household descaler”, you can use the citric acid (obtainable from chemist’s or
drug stores) instead of the descaler (the one hundred parts of water and three
parts of citric acid).
