Espresso maker R-990
EN
7
4.
Then connect the appliance to power supply. Make sure the steam control
knob is on the OFF position.
5.
Press the power switch
“ ”
one time, the power indicator turns on and the
coffee indicator blinks. After finish preheating, the coffee indicator lights
solidly. Press the coffee switch , when there is water flowing out, close the
pump immediately. The purpose of the step is to pump the water of the tank
into the housing.
6.
When the lamp in coffee switch is illuminated, you should press the coffee
switch again, there will be hot water flowing out. When the lamp in it is
extinguished, close the pump. The pre-heating is finished.
MAKE
ESPRESSO WITH GROUND COFFEE
1.
Remove the funnel by turning it in clockwise. Add ground coffee steel mesh
with measuring spoon, a spoon ground coffee power can make about a cup of
top-grade coffee, then press the ground coffee powder tightly with the tamper
2.
Set steel mesh into metal funnel, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the
“
Insert
”
position, and you can fix them into coffee maker firmly through turn it
anticlockwise until it is at the
“
Lock
”
position.
3.
Pour the hot water in the cup, after the cup is warmed up, empty the water in
the cup and dry the cup, and then place the hot cup on removable shelf.
4.
At the time, the lamp in coffee switch shall be illuminated, if it is extinguished,
wait for a moment, once the lamp in it is illuminated, you should press the
coffee switch, the pump will work for 3 seconds and stop for 3 seconds, and
then the pump will continue working, there will be coffee flowing out. Press
the coffee switch again when the required amount is got, and then the water
pump stops working.
