You can set the target humidity 30% - 80 % and se the speed fan as you wish.
7
4. Full of water light
This indicates that bucket is full or removed or not placed correctly.
IONIC+UV-C function
•
Connect the appliance to the electric network. The appliance is in standby mode.
•
Press the ON / OFF button to switch the appliance on / off.
•
When the appliance is switched on, the IONIC function and the UV C lamp start
automatically.
•
The IONIC function enriches the air with beneficial negative ions, removes dust
and cleans the air in the room. It is suitable for allergy sufferers.
•
UV-C lamp helps eliminate unwanted odors and harmful microorganisms
If bucket is full or not locked into place for over 3min, buzzer will go off for 10s
to remind you to empty bucket or put it back into the correct place.
2. Auto Stop
When bucket is full, removed or not placed correctly or the humidity is 5% lower
than the set humidity, unit will automatically stop.
3. Memory Function
If power is lost, all of the control settings are remembered. So when power is
restored, the unit will start back up in the settings it was in when power was
lost.
1. Alarm Warning
Other Instructions
•
Dry Cloths
In this option the unit work appropriate in order to dry your cloths the fan speed set in
HIGH speed automatically. In this option you cannot set the humidity the unit works.
continuously.
•
Strong
In this option the unit work without any set of humidity but the fan speed is in
HIGH speed automatically. In this option you cannot set the humidity the
unit works continuously.
•
Normal
•
Automatic
In this option the unit work without any set of humidity but the fan speed is in LOW speed
automatically. In this option you cannot set the humidity the unit works continuously.
