Option 2 Gravity Drain Hose
1. Hose is provided, so user shall prepare it in advance.
[Size: The hose thread should have an outer diameter of 10 mm and length 1 meter ]
2. Remove bucket from the unit as instructed.
3. Thread the drain hose onto the nozzle and make sure it's securely locked.
9
the hole with a lid. Note that drain hose should not be pressed, otherwise
water can not be drained out.
4. Replace the bucket. Make sure the drain hose goes through the bucket's drain
Note:
When you want to take off the drain hose, prepare a receptacle to collect
water from the nozzle.
Set an air clean filter to a dehumidifier
Notes:
The time life of the ionic and carbon filter is based on the environmental
air, normally it replaces after 1 year If it is dirty, clean up dust or debris with a brush
and out it in the sunshine..
