18/55
© 2022 ROHM Co., Ltd.
No. 64UG118E Rev.002
Feb.2022
User’s Guide
Figure 28. Plotter view with only AccZ sub-channel activated
1.3.8.2
Events view panel
When the Events view panel is enabled from the View menu the events will be show in the output window located below the plot window.
).
Figure 29. Events view panel output window
1.3.8.3
Reference line
When the “Reference line” is enabled, the plotter shows an additional horizontal line that can help to compare the real time signal value against
). The line can be dragged up/down the plotter view by pressing and holding the left mouse button. The present
value of the Reference line position is also shown in the Status bar (lower right corner of the window). To achieve a higher resolution / granularity
when setting the reference line position, use the mouse scroll wheel to zoom into and out of the plotter window.
