6/14
User
’s Guide
RAGU V1.0 User’s Manual
© 2018 ROHM Co., Ltd.
No. 61UG032E Rev.001
Nov.2018
Oscilloscope
This license allows the user to use the built-in oscilloscope
which features 4 input channels and triggering feature.
Also the oscilloscope’s calibration feature may be used.
*
Note: In order use this feature, RAGU-op1-EVK-001 is
necessary.
Figure 13. Oscilloscope at startup
Thermometer
This license allows the user to monitor the DUT’s temperature
via the thermometer control and also allow access to the Tj
Monitor window.
*Note: In order use this feature, RAGU-op1-EVK-001 in
necessary.
Figure 14. DUT temperature measurement tools
VI.
Parts of the Control Software
Main GUI
Figure 15. Main GUI
(01)ON Switch
Switch that enables access to
RAGU
(02)DUT Control Settings
Input control signal of DUT
(Motor Driver IC)
(03)Graph/Plot Area
Graphs measured values
(04)Oscilloscope Settings
Oscilloscope like settings
Table 2. Main GUI Common Controls
DUT Control Settings
Figure 16. DUT Control Settings
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
