18/21
User’s Guide
BP35C0-J11 Start up manual
© 2020 ROHM Co., Ltd.
No. 63UG011E Rev.002
JUN.2020
5.
FW Update
This chapter is provided on the Wi-SUN enhanced HAN+B-route support page of ISB Co., Ltd. Use the following documentation and
software:
Wi-SUN Enhanced HAN+B-route Support page:
https://wisun.isb.co.jp/enhan/wer0/
Name (filename)
Contents
FW for OTA
(BP35C0_J11_0400************_OTA_Bank*.zip)
This is the FW to use in the OTA update.
Please note that Bank0 and BANK1 will
change depending on the order in which they
are written.
OTA Update function Manual
(J11_ota Update function Manual _ part**.pdf
This document describes the commands and
sequences used in the OTA update.
OTA Update sample macro/operation manual
(OTA Update _ Sample script.zip)
This document describes the OTA Update
sample program described in Python and
how to use it.
* Indicates version information and bank number.
BP35C0-J11 is compatible with OTA (Over-The-Air: Via radio) update. We have released the FW (firmware) for the OTA update, so
please perform an OTA UPDATE if there is a FW update. The version of FW that is being written can be checked by getting version
information (Command code: 0x006B).
OTA update samples (Python) are available for OTA update implementation. Please use it as a reference when you check the
function and implement it to the MCU. Refer to the OTA update function manual and the OTA Update sample macro operation
manual for more information on how to use it.
