13/21
User’s Guide
BP35C0-J11 Start up manual
© 2020 ROHM Co., Ltd.
No. 63UG011E Rev.002
JUN.2020
4.2.
[STEP2] Software setup
This chapter uses the following software:
Name (filename)
Contents
Terminal Software (Tera Term)
It is a free software that can transmit serial communication and
binary file on Windows.
4.2.1.
Serial Communication Software setup
For serial communication, this board uses the Tera Term of Windows free software.
[In case of using BP35C0-J11-T01 or BP35C1-J11-T01]
Turn-On the power supply of BP359C power switch (SW1) after Tera Term installation is complete. When the power switch is ON,
the LED near SW1 lights-up green.
After powering ON, activate Tera Term and follow the below procedure.
* In the figure, BP35C0-J11-T01 is used, but the process is the same when using BP35C1-J11-T01.
[In case of using BP35C2-J11-T01]
After inserting the BP35C2-J11-T01 into the USB connector, activate Tera Term and follow the below procedure.
