background image

8/8 

 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

    The contents described herein are correct as of October, 2005

    The contents described herein are subject to change without notice. For updates of the latest  information, please contact and  confirm with ROHM CO.,LTD.

    Any part of this application note must not be duplicated or copied without our permission.

    Application circuit diagrams and circuit constants contained herein are shown as examples of standard  use and operation. Please pay careful attention to the peripheral conditions when designing  circuits  and deciding

     upon circuit constants in the set.

    Any data, including, but not limited to application circuit diagrams and information, described herein  are intended only as illustrations of such devices and not as the specifications for such  devices. ROHM  CO.,LTD. disclaims any

    warranty that any use of such devices shall be free from infringement of any  third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such

     infringement, or arising from or connected with or related  to the use of such devices.

    Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or   otherwise dispose of the same, implied right or license to practice or commercially exploit any intellectual property rights or other

    proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer.

    The products described herein utilize silicon  as  the  main  material.

    The products described herein are not designed to be X ray proof.

Published by

Application Engineering Group

<Tape and Reel information>

 

SSOP5

 

Embossed carrier tape

TR (The direction is the 1pin of product is at the upper left 

when you hold reel on the left hand and you pull out the 

tape on the right hand) 

Tape
Quantity
Direction 

of feed 

3000pcs

When you order , please order in times the amount of package quantity

.

Reel

Direction of feed 

1Pin

X X X
X X X

X X X
X X X

X X X
X X X

X X X
X X X

X X X
X X X

 SSOP5

 

<Dimension>

 

0.1

2.9

±

0.2

0.13

4

°

+

6

°

4

°

1.6

2.8

±

0.2

1.1

±

0.05

0.05

±

0.05

+

0.2

0.1

+

0.05

0.03

0.42

+

0.05

0.04

0.95

5

4

1

2

3

1.25Max.

0.2Min.

Unit

mm

When you order , please order in times the amount of package quantity

.

<Tape and Reel information>

 

Embossed carrier tape

TR (The direction is the 1pin of product is at the upper left 

when you hold reel on the left hand and you pull out the 

tape on the right hand) 

Tape
Quantity
Direction 

of feed 

3000pcs

Reel

Direction of feed 

1Pin

X X X
X X X

X X X
X X X

X X X
X X X

X X X
X X X

X X X
X X X

 VSOF5

 

<Dimension>

 

3

2

1

4

5

0.6Max.

0.5

1.2

±

0.05

1.6

±

0.05

1.0

±

0.05

1.6

±

0.05

0.2Max.

M

0.08

0.22

±

0.05

0.13

±

0.05

Unit

mm

Summary of Contents for BD48**FVE Series










Reviews: