R&S
TSMX-PPS2
Using u-center Software
Getting Started 1515.7236.02 - 02
36
6.4.2 ADR Calibration Status
Select “ESF-STATUS” message in the “Configuration View”
u-center:
Select menu “View”
Configuration View
ESF (External Sensor
Fusion)
STATUS (ESF status)
This message gives a quick overview of the calibration state for the different sensors
(temperature, wheel tick and gyro) and the usage of the different sensors for ADR.
Figure 6-7 UBX Message “ESF-STATUS"- External Sensor Fusion
For details about the various parameters of the please refer to the UBX Protocol
Receiver Description
U
ESF-STATUS (see section
"u-blox Internet Pages"
on page 44
for a link).
This documentation is also included on the accessory CD-ROM
(
..\documents\Manuals\ u-blox6_ReceiverDescriptionProtocolSpec.pdf
)
6.5 Saving User Configurations
The u-center software can be used to store user defined device settings in a file. This
file can be used later to configure other devices.
u-center:
Tools
GPS Configuration…
click on GPS >> FILE
select file and destination to store configuration and press Save
