R&S
TSMX-PPS2
Using u-center Software
Getting Started 1515.7236.02 - 02
30
6 Using u-center Software
The u-center software is part of the delivery. Please refer to section
“
..\software\Applications\”
on the accompanying CD-ROM for the setup und the user
guide or visit the u-blox website (see section
on page 44).
This software can be used for test, evaluation and maintenance of the R&S TSMX-
PPS2.
This free of charge demo software from u-blox gives the user the possibility to evaluate
the various features of this GPS receiver. Additionally, it gives the user the possibility
to change and store receiver settings permanently.
For this software is used to bring the R&S TSMX-PPS2 back into factory default
configuration. For a detailed description how to restore factory setting (see section
"Recover GPS Factory Settings"
on page 37).
Using R&S ROMES Software
Generally, there is no requirement to use u-center software for device
configuration when using R&S ROMES software. The R&S TSMX-PPS2 will
be fully supported and configured via R&S ROMES software.
Attention
Using u-Center software enables the user to change receiver settings
permanently.
This may lead to un-predictable behavior and incompatibilities with
R&S ROMES software. Under such conditions the R&S TSMX-PPS2 may be
brought back to factory settings unless it may be used with R&S software
again
