Vibration-proofed stacking
R&S
®
TSMExxDC
20
Manual 4901.1040.02 ─ 04
Figure 5-2: Aligning R&S TSMA6/6B and R&S TSME6
1 = R&S TSMA6/6B
2 = Connecting screws
3 = R&S TSME6
4 = Holes on the bottom pane of R&S TSME6
5.2
Connecting R&S TSMA6/6B-BP with R&S
TSME6 and R&S TSMExxDC
The following steps are valid for R&S TSME6 and downconverter
R&S
TSMExxDC.
For the cabling of the devices, the accessory cables R&S TSMA6-BPPT or
R&S TSMA6-BP2T are necessary.
1. Screw the collar screws (1) on the top of the R&S TSMA6/6B-BP with a Torx 8
screw driver.
● Torque: 0.66 Nm
±
0.05 Nm
Connecting R&S TSMA6/6B-BP with R&S TSME6 and R&S TSMExxDC
