manualshive.com logo in svg

Rohde & Schwarz TSME DC Series, Manual

Share
Download
Rohde & Schwarz TSME DC Series Manual Download Page 10

Preparing for use

R&S

®

TSMExxDC

10

Manual 4901.1040.02 ─ 04

3

 

Preparing for use

Here, you can find basic information about setting up the product for the first time.

3.1

 

Unpacking and checking

1. Unpack the product carefully.

2. Retain the original packing material. Use it when transporting or shipping the

product later.

3. Using the delivery notes, check the equipment for completeness.

4. Check the equipment for damage.

If the delivery is incomplete or equipment is damaged, contact
Rohde

 

&

 

Schwarz.

3.2

 

Connecting to power

This section describes how to connect the R&S

 

TSMExxDC to a power supply

unit.

3.2.1

 

Connecting to a vehicle DC power supply via cigarette
lighter

The R&S

 

TSMExxDC is delivered with a 12 V DC power supply cable with a ciga-

rette lighter connector.

1. Check the rating of the vehicle DC power supply. It has to be 12 V.

2. Connect the 4-pin connector to DC IN.

3. Connect the cigarette lighter adapter to the 12 V outlet of the vehicle.

Connecting to power

Summary of Contents for TSME DC Series
































Reviews:

No comments

Brands by name

Popular brands

Load more brands